Scan diamonds of all shapes, sizes, and colors, with J Smart Pro. With easy plug-in and play, scan lab-grown diamonds from your facility. With a scanning area of 9 inches’ x 6 inches and a scanning time of 45-60 seconds, our user-friendly detector gives accurate results.
D to K
9 inch x 6 inch
45 to 90 seconds
0.003 carat and larger
410 x 395 x 475 (in mm)
|Dimensions||410 x 395 x 475 (in mm)
16 x 15.5 x 19 (in inches)
|Power Requirements||100/240 volt|
|Temperature Range||5 to 35 °C|
|Storage Capacity||500 GB|
|Connectivity Ports||4 USB ports, 1 HDMI port, 1 VGA port, 1 LAN port and WiFi Antenna connector|
The sole purpose of the J-SmartPro is to uphold consumer confidence in the natural diamond industry. Most of the diamonds or diamond jewellery purchased today is for emotional occasions like weddings, engagements, anniversaries or birthdays, so on and so forth. The consumers should know what they are buying. Lab-Grown diamond may have a place in the jewellery segment but mixing or unethically selling Lab-Grown diamonds with the tag of it being a Natural diamond is playing with the customer’s emotions, resulting to lack of consumer confidence in the industry. This concern was shared with us by many players of the fraternity. Thereafter as being a part of this industry we have taken this situation as a challenge and invented J-SmartPro as a result.
Most of the detection tools or devices available in the market are either very costly or are limited to specific sizes, shapes, speed, accuracy or the device is being made for specific clientele alone. Most devices can only detect TYPE- IIA which requires further testing and analysis to be done in the Lab.
It requires a lot of time and energy to make sure that all purchases are Natural Diamonds. After years of research of the perennial issues, we have consolidated the solution in one single device i.e. J-SmartPro. J-SmartPro was developed to detect Lab-Grown Diamonds.
J-SmartPro is a device that detects lab grown diamonds of all sizes from 0.003Cts (+0000 Sieve size) and larger, whether colourless or near to colourless Lab-Grown diamonds.
Any shape is detectable, but for small (below +11) fancy shapes it needs a replaceable attachment.
J-SmartPro directly detects lab grown Lab-Grown diamonds (Diamond grown in laboratory by HPHT as well as CVD techniques) within all colourless or near colourless diamonds. It does not require further testing as the results are shown on the spot.
Currently, it scans one tray (9-inch x 6 inch) filled with diamonds in about 45-90 seconds.
Operating this device is very simple and easily understandable. The operator needs to go through the operation manual before operating J-SmartPro. For the test, ensure that the right size tools are chosen, colourless diamonds must be properly cleaned/boiled and they should not overlap one another.
While designing the machine, we have taken care of using limited parts that require service in the machine. If anything happens to the machine within the warranty period or even after the warranty period, the customer is advised to contact our India support centre.
|Trays||1 Loose diamond tray
2 Jewelry trays with 36 ring slots
1 Bangle tray, 1 Eternity ring tray (auto-rotation to capture the entire item in 360°)
|Keyboard & Mouse||Wireless|
|Fluorescent Light||Integral Fluorescent Light|
|Data Processing||In-built Touch Screen Computer|
|Security Key||1 Software security USB key|
|Operating System||Windows 10|
Plot No. 3, B/S. Kiran Hospital,
Vastadevdi Road, Katargam, Surat
395004, Gujarat, India